I. Jiangsu Yueda Textile Group Co., Ltd. 2019 annual lightning protection service project uses the unit's own funds, the project funds have been implemented, and qualified bidders are invited to participate in the project bidding.
Second, the project overview is as follows:
1. Project Name: 2019 lightning protection testing service.
2. Project location: Jiangsu Yueda Textile Group Co., Ltd.
3. Project content: Buildings and categories requiring lightning protection; covering roofs, floors, local high-rise platforms, basements, etc., detecting the effectiveness of lightning protection devices, connectivity of lightning receptors, down conductors, grounding devices, etc. The effective grounding resistance of the grounding system requires ≤10Ω. Whether the grounding insulation impedance of the power lightning protection system is at the allowable value, whether the grounding system is reliable, and whether the instantaneous clamping voltage value changes. Information system signal lightning protection system, whether the connected resistance is the parameter allowable value, whether the instantaneous clamp pressure value changes, the normal value of the ground insulation resistance, etc. (specific content of the bidder site survey).
The units involved in the association: lightning protection testing of the textile group management headquarters, cotton spinning companies and home textile companies.
Third, the bidding method: invite bidding price negotiation.
4. Distribution status and requirements of inspection points: See Annex (1). The unfinished matters are considered as usual.
5. Issuance of the completion test report
During the specified inspection period, the bidder shall issue a detailed and standardized written lightning protection test report, the existing defects and suggestions for improvement.
6. Fee settlement
The lightning protection test of each participating unit shall be completed, and after the relevant office personnel confirm the relevant work, the relevant units shall settle the corresponding testing fees within 7 working days.
Seven, the highest price limit and evaluation method
The bid price of the project shall not exceed 11,500 yuan, otherwise it will be deemed as invalid bidding documents and will not participate in the review.
The bid evaluation method is the lowest price method.
Eight, testing the construction period
Within 8 days after the contract is signed, the test is completed and delivered, and the corresponding report is issued.
9. The main qualifications that the bidder should have
1. The bid applicant must be registered in China. It has the qualification of Class B and above for the lightning protection device issued by the meteorological department. It also has the Metrology Certificate (CMA) issued by the provincial or above metrological administrative department, and can independently test and test. Independent legal person for the program and test report.
2. The person in charge of the bidding project must be a registered employee of the unit and have a technical title of intermediate level or above in lightning protection related majors.
3. This project does not accept consortium bidding.
4. The bid bond: RMB 3,000. The bidder must submit the bid deposit to the Finance Department of Jiangsu Yueda Textile Group Co., Ltd. before the bid opening. When the bid is opened, the bidder will submit the deposit receipt to the staff for verification, otherwise the bidder will not be deemed to have paid the bid bond. If the bid bond is not required to be submitted in accordance with the bidding documents, the bid documents shall be regarded as invalid bids.
(The unsuccessful bidder shall return the interest within 5 working days from the date of the confirmation of the bidding result).
X. Composition of the tender documents
1. A copy of the bidder's three-in-one business license and a copy of the official seal; and the lightning protection device issued by the meteorological department to test the qualification of Class B and above, and at the same time have the measurement certificate issued by the provincial or above metrological administrative department (CMA) ) (original for reference).
2. Bidder's bid quotation form (Annex 2).
3. Legal representative's identity certificate (Annex III).
4. Power of Attorney (if authorized) (Annex IV).
5. Bidding Commitment (Annex V).
6. Other information that the Bidder believes should be provided or other matters that need to be explained.
7. Sales performance of major customers in the past two years.
XI. Sealing and marking of tender documents
1. The bidder's bidding documents are in duplicate, one original and one copy, which shall be marked with the “original” or “copy” mark. The original and the copy are inconsistent, whichever is the original, if the bidder fails to indicate “ The original or "copy" mark, when there is a contradiction between the bid documents, the bid evaluation committee makes a determination against the bidder.
2. All bid documents must be sealed and sealed at the seal after they are placed in the envelope.
Twelve, the validity period of the bid
The bidding period for this project is 90 calendar days.
XIII. Contract period: May 1, 2019 to April 30, 2020
XIV. Deadline for submitting bid documents: At 10:00 on April 17, 2019, the tender documents received thereafter will not be accepted.
15. Time for bid opening: At 10:00 on April 17, 2019, the authorized representative or legal representative attending the opening meeting shall carry the identity document.
16. Place of submission: Meeting Room 2, 2nd Floor, Comprehensive Building, Yueda Textile Group Co., Ltd. (699 Yancheng Century Avenue).
17. This announcement is published on the website of Jiangsu Yueda Textile Group Co., Ltd. ()
Business Contact: Zhuang Yong 13851086261 (Textile Group Management Headquarters)
Wang Yong 19952881000 (Yueda Home Textile Fabric Co., Ltd.)
Li shooting bin 13485286261 (Yueda Cotton Textile Co., Ltd.)
Ticket contact: Bao Tor 13815534545